Numerical simulation and experimental investigation of transient anode surface temperature in vacuum arc

In this paper, the spatial-temporal evolution of the anode temperature in the vacuum arc during the formation of an anode spot is investigated by numerical simulation and experiments. A transient self-consistent model is established to calculate the arc parameters and the anode temperature. The simulations predict that the maximum anode temperature always occurs after the current peak. Ion density and atom density at the anode side increase significantly during the formation of the anode spot. In the anode spot mode, more evaporated anode material comes into the arc column, leading to higher plasma temperature around the spot. The anode vapor can reduce the energy flux from the plasma to the anode center, providing more uniform anode temperature distribution and correspondingly smoother plasma parameter distributions in the vicinity of the anode center. In addition, a higher Cr fraction in the electrodes can result in a higher anode temperature. Near-infrared spectroscopy and high-speed camera thermography are used to study the anode temperature experimentally in order to verify the simulation results. A reasonable agreement was found.