Ionogel-based hybrid polymer-paper handheld platform for nitrite and nitrate determination in water samples

Nowadays, miniaturization and portability are crucial characteristics that need to be considered for the development of water monitoring systems. In particular, the use of handheld technology, including microfluidics, is exponentially expanding due to its versatility, reduction of reagents and minimization of waste, fast analysis times and portability. Here, a hybrid handheld miniaturized polymer platform with a paper-based microfluidic device was developed for the simultaneous detection of nitrite and nitrate in real samples from both, fresh and seawaters. The platform contains an ionogel-based colorimetric sensor for nitrite detection and a paper-based microfluidic device for the in situ conversion of nitrate to nitrite. The platform was fully characterized in terms of its viability as a portable, cheap and quick pollutant detector at the point of need. The calibration was carried out by multivariate analysis of the color of the sensing areas obtained from a taken picture of the device. The limits of detection and quantification, for nitrite were 0.47 and 0.68 mg L-1, while for nitrate were 2.3 and 3.4 mg L-1, found to be within the limits allowed by the environmental authorities, for these two pollutants. Finally, the platform was validated with real water samples, demonstrating its potential to monitor nitrite and nitrate concentrations on-site as a first surveillance step before performing extensive analysis.