Parameter optimization in a continuous direct compression process of commercially batch-produced bisoprolol tablets

Continuous tablet manufacturing is a competitive option to replace the traditional batch manufacturing approach. The aim of this study was to evaluate technology transfer from batch-based direct compression of a commercial tablet formulation to continuous direct compression without changes to the composition of the formulation. Some powder studies were conducted with the raw materials and multi-tip punches were utilized in the tableting studies. To lower the high level of tablet weight variability that was evident during preliminary tests, a process parameter optimization was performed using an experimental design with different rpm values of force feeder and mixer impeller. By selecting the most appropriate settings of these parameters for the studied product, the weights of the tablets could be controlled adequately to meet the specification criteria. The functionality of the best-performing parameter settings was investigated with a three-hour-long tableting run. The tablets were evaluated with the same quality criteria as the commercial batch-produced tablets, and they passed all the tests performed in this study. Despite the challenging material properties according to the flowability tests, production of tablets with the desired quality was achieved using the original composition with continuous direct compression.