Research on rolling bearing fault diagnosis method based on simulation and experiment fusion drive

Aiming at the problem that the rolling bearing fault data are difficult to obtain and that the traditional fault diagnosis method does not consider the signal uncertainty characteristics and the low accuracy of models in the process of rolling bearing fault, a fault diagnosis method based on simulation and experiment fusion drive is proposed. First, the dynamics simulation model of rolling bearings under different fault conditions is established to obtain the bearing fault simulation signals. Second, a sequence generative adversarial network is used to fuse the simulation and experimental data. Bearing vibration signals are often very uncertain, so considering the probability characteristics of fault signals, the probability box model under different fault states is constructed by the direct probability box modeling method, and its characteristic vectors are extracted. Finally, an extreme gradient boosting Tree model for fault diagnosis classification is constructed to compare and evaluate the classification and diagnosis effects of bearing states before and after data fusion. The results show that the proposed method has a good diagnostic effect and is suitable for solving the fault diagnosis problem under the condition of insufficient data.