Effect of static liquid Galinstan on common metals and non-metals at temperatures up to 200 °C

Liquid metal Galinstan (GaInSn) is corrosive in nature against other solid metals as its base component is gallium. This study experimentally investigated the compatibility of GaInSn with eight common metals at temperatures up to 200 °C for 2000 h, including aluminum, copper, brass, ferritic and austenitic stainless steels (E-brite, SS304L, SS316L), and nickel-chromium alloys (Inconel and Hastelloy). This assessment aims to assist in design and material selection of a liquid metal magnetohydrodynamics system that houses Galinstan for power generation by low temperature natural heat sources or industrial waste heat. Design and fabrication of this renewable power system required assurance of material compatibility with common construction and instrumentation materials. The most severe corrosion effects of GaInSn on the metal alloys were observed on aluminum, copper, and brass, which confirms the results of previously conducted studies. No obvious corrosion on stainless steel or nickel–chromium alloys were observed by this study, which reveals that stainless steel has a good resistance to attack by GaInSn up to 200 °C. Six non-metals were also evaluated, including acronitrile butadiene styrene (ABS), acrylic, nitrile rubber (Buna N), nylon, polyvinyl chloride (PVC), and Teflon, which were deemed to be compatible with GaInSn up to the temperatures tested.