Removal of heavy metals from fly ash using electrodialysis driven by a bioelectrochemical system: a case study of Pb, Mn, Cu and Cd

Municipal solid waste incineration (MSWI) fly ash is classified as hazardous waste due to high leachable heavy metals, and incineration leachate belongs to organic wastewater with high biodegradability. Electrodialysis (ED) has shown potential for the removal of heavy metals from fly ash, and bioelectrochemical system (BES) employs biological and electrochemical reactions to generate electricity and remove contaminants from a wide range of substrates. In this study, the ED-BES coupled system was constructed for the co-treatment of fly ash and incineration leachate, where the ED was driven by BES. The treatment effect of fly ash by varying additional voltage, initial pH and liquid-to-solid (L/S) ratio was evaluated. Results showed that the highest removal rates of Pb, Mn, Cu and Cd were 25.43%, 20.13%, 32.14% and 18.87% after 14 days treatment of the coupled system, respectively. These values were obtained under 300 mV of additional voltage, L/S 20 and initial pH3. After the treatment of the coupled system, the fly ash leaching toxicity was lower than the threshold of GB5085.3-2007. The highest energy saving for removed Pb, Mn, Cu and Cd were 6.72, 15.61, 8.99 and 17.46 kWh/kg, respectively. The ED-BES can be considered a cleanliness approach to treating fly ash and incineration leachate simultaneously.