An Accurate Model for Prediction of Turbulent Frictional Pressure Loss of Power-Law Fluids in Eccentric Geometries

Summary The effect of axial flow of power-law drilling fluids on frictional pressure loss under turbulent conditions in eccentric annuli is investigated. A numerical model is developed to simulate the flow of Newtonian and power-law fluids for eccentric annular geometries. A turbulent eddy-viscosity model based on the mixing-length approach is proposed, where a damping constant as a function of flow parameters is presented to account for the near-wall effects. Numerical results including the velocity profile, eddy viscosity, and friction factors are compared with various sets of experimental data for Newtonian and power-law fluids in concentric and eccentric annular configurations with diameter ratios of 0.2 to 0.8. The simulation results are also compared with a numerical study and two approximate models in the literature. The results of extensive simulation scenarios are used to obtain a novel correlation for estimation of the frictional pressure loss in eccentric annuli under turbulent conditions. Two new correlations are also presented to estimate the maximum axial velocity in the wide and narrow sections of eccentric geometries.