发射机
CMOS芯片
电气工程
电子工程
无线
正交调幅
宽带
炸薯条
计算机科学
电子线路
卡姆
工程类
频道(广播)
电信
误码率
作者
Abdelaziz Hamani,Francesco Foglia Manzillo,Alexandre Siligaris,Nicolas Cassiau,Frédéric Hameau,Fabrice Chaix,C. Dehos,Antonio Clemente,Jose Luis González-Jiménez
标识
DOI:10.1109/rfic54546.2022.9863127
摘要
This paper presents an energy-efficient wideband D- band wireless link using receiver (RX) and transmitter (TX) modules based on a channel-bonding scheme. The modules include RX and TX integrated circuits (ICs) fabricated in 45nm CMOS RFSOI technology. They are mounted on low-cost multi-layer printed circuit boards (PCBs) and connected to patch antennas. The RX and TX ICs are composed of two down-conversion and up-conversion chains, respectively, operating over contiguous sub- bands around 147.96 GHz. The required multiple millimeter-wave local oscillator signals (LOs)are generated on-chip. The presented wireless system achieves a data rate of 56.32 Gb/s by using 16 QAM modulation over 8 radiofrequency (RF) channels, with a competitive energy consumption (RX+TX) of 18 pJ/bit, including the LOs generation circuitry.
科研通智能强力驱动
Strongly Powered by AbleSci AI