吸附
过硫酸盐
石墨烯
催化作用
氧化物
化学
化学工程
磺酸盐
降级(电信)
无机化学
钠
有机化学
计算机科学
电信
工程类
作者
Wei Wang,Ying Cao,Xue Hu,Shuangxi Zhou,Donghai Zhu,Di Qi,Shubo Deng
标识
DOI:10.1016/j.jhazmat.2019.121662
摘要
The catalytic performance of Fe3O4/reduced graphene oxide (Fe3O4/rGO) nanocomposite makes it attractive for the removal of emerging pollutants from water, but the combination of its efficient adsorption and degradation of per- and polyfluoroalkyl substances has not been studied. Here we report the optimal granular Fe3O4/rGO with high thermal and acid resistance stability through controlling its self-assembly for the adsorption and degradation of sodium p-perfluorous nonenoxybenzene sulfonate (OBS) from water. The maximum adsorption capacity for OBS was calculated to be 362.4 μmol/g according to Langmuir fitting. Electrostatic, π-π and hydrogen bonding interactions were involved in OBS adsorption, and the quaternary N in Fe3O4/rGO was a key adsorption site. The efficiency of the utilization of free radicals generated in Fenton-like and persulfate (PS) systems increased with the increase of OBS adsorbed onto the Fe3O4/rGO, while the increase of OBS amount adsorbed on Fe3O4/rGO would casue a slow OBS removal in the adsorption-degradation process due to the slow adsorption process. The Fenton-like oxidation was more efficient for OBS removal than PS oxidation. The spent Fe3O4/rGO was able to be reused in the Fenton-like system at least ten times, while the OBS removal in the PS reaction system was reduced to 47.8 % after six reuse cycles.
科研通智能强力驱动
Strongly Powered by AbleSci AI