Y2O3-doped BST flexoelectric ceramic energy harvester

The study employed the water-based casting technique to prepare BST sheets, which were then combined with PDMS to BST composite sheets for wind energy harvesting. By adding 0.3-1.2 mol% Y2O3 as an additive, the dielectric constant and the flexoelectric coefficient of the BST sheets were significantly enhanced. The Y2O3 and BST powders were mixed to form a casting slurry with the appropriate viscosity, which was then cast into a sheet. After the sintering process, silver electrodes were coated on both surfaces of the sheet. To enhance the flexibility of the sheet, PDMS was applied to the silver-coated surfaces, creating a "sandwich structure" composite sheet. The flexoelectric properties of the composite sheets are characterized utilized the micro cantilever beam method. The energy harvesting experiments, conducted in a simulated wind tunnel environment, demonstrate that the composite sheets exhibit varying flexoelectric properties and energy conversion efficiencies, depending on their thickness. When the doping amount of Y2O3 is 0.6mol%, the composite sheets with a BST layer thickness of 200μm exhibit the highest flexoelectric coefficient of 1.1μC/m; the composite sheets with a BST layer thickness of 100μm exhibit the strongest current output capability of 4.2nA. These findings indicate that the developed composite sheets could be promising for applications in renewable energy harvesting, particularly for capturing and converting wind energy into usable electrical power.