Effect of borates on the synthesis of nanoscale hexagonal boron nitride by a solid‐state method

Abstract This study delves deeply into the effect of different borates (lithium tetraborate, sodium tetraborate, calcium metaborate, ammonium pentaborate) on the production and fundamental characteristic features of nanoscale hexagonal boron nitride (hBN) structure with the assistant of standard characteristic measurement methods, namely, Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM). The hBN samples are synthesized by reaction of powder urea, boron oxide, and different kinds of borates via the modified O'Connor method (performed at a relatively lower main heat treatment temperature of 1,100°C). All the results obtained show that the usage of borates affects positively the formation of nanoscale hBN structure. In more detail, the FTIR experiment results reveal that the presence of two strong c peaks appeared at ~1,380 and ~780 cm −1 in the spectra points out the conventional BN in‐plane and out‐of‐plane vibrations, respectively. The XRD patterns also confirm the production of high‐ordered hBN as the existence of the main peaks of the corresponding hexagonal system. As for the SEM examination, it is found that all the hBN materials exhibit totally different crystallinity quality and microstructural characteristics. The hBN compound prepared by the sodium tetraborate content shows the most uniform surface appearance with the smoothest/densest crystal structure, best grain orientations, and finest grain interactions. Hence, the material with strong stretching of interatomic bonds shows the highest material (fracture) strength. Moreover, the TEM images illustrate that all the products are composed of uniform multi‐walled nanotubes and nanorods with an average length of ~250 nm.