High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Type II fiber Bragg gratings (FBGs) inscribed with femtosecond ( f s) laser possess significant potential for high temperature sensing. In this work, we propose and demonstrate a method for fabricating a parallel-integrated ultra-short type II FBG (PI-US-FBG) by using an f s laser point-by-point technology. The PI-US-FBG, featuring by an ultra-short grating length of 80 µm, consists of six identical FBGs parallel-inscribed into a fiber core at different radial positions in the same cross section. The fabricated PI-US-FBG exhibits a broadband Gaussian-shape spectrum with a low reflectivity of ∼10%, an ultra-low out-of-band insertion loss of 0.01 dB, and a large full width at half maximum bandwidth of 9.4 nm. Moreover, this PI-US-FBG could be used as a high temperature sensor with a wide measurement range from 25 to 1000 °C, and an excellent linearity was achieved with a dual-wavelength differential detection. The temperature sensitivity could be increased from 0.00316 to 0.00945 (dB/ °C) by enlarging the wavelength spacing of the tunable laser. In addition, two cascaded PI-US-FBGs were used to precisely measure the temperature field distribution in a CO ₂ laser spot with a very high spatial resolution of 100 µm. Hence, the proposed PI-US-FBGs could be used for a large-scale fiber sensor network, especially in future distributed temperature measurement with a high spatial resolution.