Application of a membrane-less air cathode microbial fuel cell to treat municipal waste composting leachate

The adverse effects of high strength wastewaters on the microbial activities have created a challenge to biological treatments. Microbial fuel cell has been considered as a promising process because the electrical potential generation can stimulate microorganisms and overcome the inhibitory effect. However, several issues (e.g., scalability, high costs and maintenance) have prevented the process from the industrial applications. Elimination of the proton exchange membrane has been suggested as a remedy to the mentioned problems. In this work, a membrane-less microbial fuel cell was modified by putting the cathode within a thin sand layer (instead of the proton exchange membrane) to treat a high strength wastewater sample. The influences of the feed organic load and time of treatment in the modified system were studied in batch and continuous operations. It was revealed that the batch operation efficiency was higher for the lower feed loadings as a 5-day batch treatment removed 66 ± 4% of the 15,000 ± 500 mg/L initial chemical oxygen demand while the continuous process efficiency with 9-day hydraulic residence time was slightly more than 50%. However, the efficiency of the continuous operation for treatment of higher initial loading values was better than the batch mode with the removal efficiency of 41 ± 2% versus 12 ± 2% for a more concentrated leachate feed (45,000 ± 1000 mg/L). Finally, it was disclosed that the modified membrane-less MFC employed in this work can be effective in treatment of high strength wastewaters in larger scales with lower costs.