Enhanced Structural Stability and Capacity Retention of Ni-Rich LiNi0.91Co0.06Mn0.03O2 Cathode Material By Dual Doping and Coating for Libs

Nickel-rich layered cathode material has been received a lot of attention due to their superior cycle-ability, high energy density and improved safety. However, there are some issues which are needed to be resolved to ensure the long term application. The hostile attack of electrolyte with the charged cathode electrode results in the growth of thick solid electrolyte interphase (SEI) at the expense of Li + consumption and increase in interfacial resistance. In addition, de/intercalation of Li + leads to the continuous contraction and expansion of lattice structure that leads to the crack formation in the active material particles during extended cycling. In this work, a facile technique has been adopted to resolve the mentioned problems. In this study, Li 3 BO 3 has been coated on the NCM surface to protect the active material against the continuous attack of electrolyte and boron is doped to enhance the structural stability of LiNi 0.91 Co 0.06 Mn 0.03 O 2 NCM cathode material. The samples were characterized by XPS, XRD, SEM and TEM and the electrochemical properties were measured by assembling the coin cells. The XRD results confirm the shifting of (003) diffraction peak towards low angle which validates the boron doping in the crystal structure. The presence of B1s is confirmed on the surface of modified NCM by XPS analysis. The FETEM images shows a uniform and distinct coating layer of 12 nm on the surface of 0.05 wt% coated NCM. The 0.05 wt% NCM samples offers the highest discharge capacity of 215.3 mAh g -1 at 0.1C and capacity retention of 81.6% at 0.5C (1C = 202 mA g -1 ) after 100 cycles. The reason behind enhanced cycling is the high bond dissociation energy of B−O (ΔH f298 = 402 kJ mol −1 ) than Ni–O (ΔH f298 = 391.6 kJ mol −1 ), Co–O (ΔH f298 = 368 kJ mol −1 ) and even Mn–O (ΔH f298 = 402 kJ mol −1 ). Even at 2C cycling, LBO-0.05 NCM sample demonstrated a capacity retention of 79.4% after 100 cycles while pristine shows only 67.3%. The modified samples displayed superior rate performance as compare to pristine NCM, especially at high current density. The cyclic voltammetry and EIS results are in-line with the cycling data. The presence of B 3+ doping in host structure and Li 3 BO 3 coating on the NCM surface results in the superior electrochemical performance of modified NCM.