In-situ Groundwater Remediation of Contaminant Mixture of As(III), Cr(VI), and Sulfanilamide via Electrochemical Degradation/Transformation using Pyrite

Electrochemical advanced oxidation processes (EAOPs) are effective in removing persistent contaminants from groundwater. However, their practical applicability depends significantly on various site-specific characteristics. Therefore, the primary objective of this investigation was to study the feasibility of EAOPs and pyrite, which is a sulfide mineral, to effectively remove the mixture of arsenic (As (III)), chromium (Cr (VI)), and sulfanilamide in groundwater. We conducted a comparison of three systems: (1) EAOP alone, (2) pyrite alone, and (3) a combined EAOP and pyrite system. In EAOP alone, sulfanilamide was effectively oxidized (80%), while the electrochemical transformation of As(III)/Cr(VI) into As(V)/Cr(III) was limited. In just the pyrite system, As(III), Cr(VI), and sulfanilamide were adsorbed onto the surface of pyrite (60%, 20%, and 18%). Neither the EAOP nor the pyrite system alone could effectively treat the contaminants mixture. Nonetheless, the combined system completely removed As(III), Cr(VI), and sulfanilamide by the synergistic reaction. This could be attributed to the formation of green rust, a natural adsorbent mineral produced as a reaction of dissolved iron, generated via electrochemical pyrite oxidation, with the groundwater electrolyte (e.g., CO