Efficient removal of organic dyes using electrospun nanofibers with Ce-based UiO-66 MOFs

Cerium-based UiO-66 (Ce-UiO-66) metal-organic frameworks (MOFs) were synthesized via a facile solvothermal method and fully characterized using FTIR, XRD, BET, SEM, EDX, and zeta potential techniques. The synthesized Ce-UiO-66 particles were embedded into an electrospun cross-linked polyvinyl alcohol (PVA)/chitosan (CTS) nanofiber (EPCNF), and then employed to remove organic dyes from water. The adsorption results demonstrated that the adsorption capacities of both anionic (Congo Red (CR), Methyl Orange (MO) and Methyl Red (MR)) and cationic (Methylene Blue (MB)) dyes over the fabricated electrospun nanofibers (ENFs) increased with increasing the loadings of Ce-UiO-66 MOFs. Accordingly, the adsorption performance of EPCNF-10 (containing 10 wt% of Ce-UiO-66 MOFs) adsorbent toward these organic dyes is in the order of CR (102.04 mg/g) > MO (87.71 mg/g) > MR (65.35 mg/g) > MB (34.24 mg/g). Moreover, it was found that the Freundlich isotherm model and the pseudo-second-order kinetic model were appropriate for describing the adsorption behaviors of EPCNF-10 adsorbent toward both anionic and cationic dyes. Thus, it can be proposed that the fabricated EPCNF-10 adsorbent would be effective adsorbent materials for the removal of anionic and cationic dyes from water due to its excellent adsorption performance, facile preparation, good regeneration, and simple separation from aqueous solutions.