A Study on the Correlation between the Oxidation Degree of Oxidized Sodium Alginate on Its Degradability and Gelation

Oxidized sodium alginate (OSA) is selected as an appropriate material to be extensively applied in regenerative medicine, 3D-printed/composite scaffolds, and tissue engineering for its excellent physicochemical properties and biodegradability. However, few literatures have systematically investigated the structure and properties of the resultant OSA and the effect of the oxidation degree (OD) of alginate on its biodegradability and gelation ability. Herein, we used NaIO₄ as the oxidant to oxidize adjacent hydroxyl groups at the C-2 and C-3 positions on alginate uronic acid monomer to obtain OSA with various ODs. The structure and physicochemical properties of OSA were evaluated by Fourier transform infrared spectroscopy (FT-IR), ¹H nuclear magnetic resonance (¹H NMR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and thermogravimetric analysis (TGA). At the same time, gel permeation chromatography (GPC) and a rheometer were used to determine the hydrogel-forming ability and biodegradation performance of OSA. The results showed that the two adjacent hydroxyl groups of alginate uronic acid units were successfully oxidized to form the aldehyde groups; as the amount of NaIO₄ increased, the OD of OSA gradually increased, the molecular weight decreased, the gelation ability continued to weaken, and degradation performance obviously rose. It is shown that OSA with various ODs could be prepared by regulating the molar ratio of NaIO₄ and sodium alginate (SA), which could greatly broaden the application of OSA-based hydrogel in tissue engineering, controlled drug release, 3D printing, and the biomedical field.