The relationship between myocardial and hepatic T2 and T2* at 1.5T and 3T MRI in normal and iron-overloaded patients

Background Cardiac and liver iron assessment using magnetic resonance imaging (MRI) is non-invasive and used as a preclinical “endpoint” in asymptomatic patients and for serial iron measurements in iron-overloaded patients. Purpose To compare iron measurements between hepatic and myocardial T2* and T2 at 1.5T and 3T MRI in normal and iron-overloaded patients. Material and Methods The T2 and T2* values from the regions of interest (ROIs) at mid-left ventricle and mid-hepatic slices were evaluated by 1.5T and 3T MRI scans for healthy and iron-overloaded patients. Results For iron-overloaded patients, the myocardial T2 (1.5T) and myocardial T2 (3T) values were 60.3 ms (range = 56.2–64.8 ms) and 55 ms (range = 51.6–60.1 ms) (ρ = 0.3679) while the myocardial T2* (3T) 20.5 ms (range = 18.4–25.9 ms) was shorter than the myocardial T2* (1.5T) 35.9 ms (range = 31.4–39.5 ms) (ρ = 0.6454). The hepatic T2 at 1.5T and 3T were 19.1 ms (range = 14.8–27.9 ms) and 15.5 ms (14.6–20.4 ms) (ρ = 0.9444) and the hepatic T2* at 1.5T and 3T were 2.7 ms (range = 1.8–5.6 ms) and 1.8 ms (range = 1.1–2.9 ms) (ρ = 0.9826). The line of best fit exhibiting the linearity of the hepatic T2* (1.5T) and hepatic T2* (3T) had a slope of 2 and an intercept of –0.387 ms (R = 0.984). Conclusion Our study found myocardial T2 (1.5T) nearly equal to T2 (3T) with myocardial T2* (3T) 1.75 shorter than myocardial T2* (1.5T). The relationship of hepatic T2* (1.5T) and hepatic T2* (3T) was linear with T2* (1.5T) approximately double to T2* (3T) in iron-overloaded patients. This linear relationship between hepatic T2* (1.5T) and hepatic T2 (3T) could be an alternative method for estimating liver iron concentration (LIC) from 3T.