Fabrication and characterization of in-situ Ti(C, N) - CoCrFeNi cermets via mechanical alloying and spark plasma sintering

Ti(C, N) cermets were prepared by adding CoCrFeNiTi to g-C3N4 and using mechanical alloying and spark plasma sintering techniques. The evolution of microstructure and the systematic analysis of the influence of different binder content on mechanical properties were investigated. This result demonstrates that with an increase in binder content, the grain size of Ti(C, N) in the cermets decreases, and the formation of spheroidal small grains becomes more prominent while the occurrence of large grains decreases. Additionally, the relative density and hardness of Ti(C, N) metal ceramics have slightly decreased. The fracture toughness of Ti(C, N)/ HEA cermet is codetermined by the intrinsic sintering property and deformability of HEA binders. The Ti(C, N) cermets (CH3) exhibits excellently bending strength and fracture toughness,which are 1941MPa and 11.2MPa·m1/2 respectively. The study aims to enhance the mechanical properties and toughness of Ti(C, N) and proposes a novel approach for the synthesis of Ti(C, N) cermet.