Innovative wearable solutions: Semi-releasing ion-conductive lignin hydrogel sensors for enhanced practicability

The severe negative effects of impurities adhering to the external surface of wearable devices can significantly influence the signal transmission, performance, and lifespan of hydrogel sensors. Herein, we developed an ion-conducting hydrogel sensor with a strong adhesive side and a non-adhesive side, similar to a "semi-releasing material." This hydrogel, formulated using deep eutectic solvents obtained from choline chloride and acrylic acid, contained lignin. This versatile material, exhibiting properties similar to semi-releasing materials, was treated with an AlCl3 solution on one side. Additionally, the hydrogel was successfully used as a highly adhesive strain sensor for real-time monitoring of various human activity signals. Moreover, the hydrogel demonstrated excellent environmental tolerance and conductivity. Lignin extracted from wood flour endowed the hydrogel sensor with excellent adhesion energy (up to 427.1 J/m2) and UV resistance. Treatment of hydrogels with AlCl3 completely eliminated their adhesiveness, thereby enhancing fracture elongation and tensile strength. This improvement can be attributed to the absence of carboxyl groups and the formation of a metal-phenolic network. The implementation of this convenient and efficient strategy provides a more feasible approach to address challenges related to impurity adhesion and signal transmission in flexible wearable devices.