Applying water environment capacity to assess the non-point source pollution risks in watersheds

Comprehension of the spatial and temporal characteristics of non-point source (NPS) pollution risk in watersheds is essential for NPS pollution research and scientific management. Although the concept of water functional zones (WFZ) has been considered in the NPS pollution risk assessment process. However, no comprehensive study of the NPS pollution risk has been conducted to effectively protect water quality in watersheds with different water environment capacity. Therefore, this study proposes a new NPS pollution risk assessment method that integrates water functional zoning, receiving water body environmental capacity, and space-time distribution of pollution load for quantifying the impact of pollution discharge from sub-catchment on nearby water body quality. Based on the NPS nutrient loss process modeled by the Soil and Water Assessment Tool (SWAT), this method was used to assess the NPS pollution risk in the Le 'an River Watershed at annual and monthly scales. The results showed that the NPS pollution risk is characterized by seasonal and spatial variability and is influenced clearly by the water environment capacity. High NPS pollution loads are not necessarily high pollution risks. Conversely, a low NPS nutrient pollution load does not represent a low regional risk sensitivity. In addition, NPS risk assessment based on the water environment capacity could also distinguish the differences in risk levels that were masked by similar NPS pollutant loss and the same water function zoning to achieve accurate control of NPS pollution management in watersheds.