材料科学
聚氨酯
石墨烯
氧化物
压力传感器
纳米技术
涂层
纳米线
复合材料
机械工程
冶金
工程类
作者
Yange Luan,Shaolin Zhang,Thuy Hang Nguyen,Woochul Yang,Jin‐Seo Noh
标识
DOI:10.1016/j.snb.2018.03.114
摘要
Unlike the stretchable physical sensors such as stretchable pressure sensors, strain sensors, and temperature sensors, few works have been reported on the stretchable gas sensors. This study presents that stretchable gas sensors can be fabricated by decorating reduced graphene oxide/silver nanowires (rGO/AgNWs) hybrids on the porous polyurethane (PU) sponges using a facile dip-coating method. The sensors show good room-temperature responses to NO2 gas under both a bending strain (r = 3 mm) and a large tensile strain up to 60%. The response of about −15% is measured at a 50 ppm of NO2 under a 60% strain. Furthermore, reducing gases like acetone and ethanol can also be detected under the large strains. The results of this study offer a new insight into realization of highly stretchable and easy-to-fabricate gas sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI