Effective multi-sensor data fusion for chatter detection in milling process

This paper introduces a newly developed multi-sensor data fusion for the milling chatter detection with a cheap and easy implementation compared with traditional chatter detection schemes. The proposed multi-sensor data fusion utilizes microphone and accelerometer sensors to measure the occurrence of chatter during the milling process. It has the advantageous over the dynamometer in terms of easy installation and low cost. In this paper, the wavelet packet decomposition is adopted to analyze both measured sound and vibration signals. However, the parameters of the wavelet packet decomposition require fine-tuning to provide good performance. Hence the result of the developed scheme has been improved by optimizing the selection of the wavelet packet decomposition parameters including the mother wavelet and the decomposition level based on the kurtosis and crest factors. Furthermore, the important chatter features are selected using the recursive feature elimination method, and its performance is compared with metaheuristic algorithms. Finally, several machine learning techniques have been adopted to classify the cutting stabilities based on the selected features. The results confirm that the proposed multi-sensor data fusion scheme can provide an effective chatter detection under industrial conditions, and it has higher accuracy than the traditional schemes.