Introducing Br, K, and cyano group into carbon nitride for efficient photocatalytic hydrogen peroxide production then in situ tetracycline mineralization

In this wok, Br, K-doped and cyano group-rich carbon nitride (CN) were prepared via pyrolysis of molten urea and 6-Bromopyridine-3-carbaldehyde, followed by re-calcination with potassium thiocyanate. The hydrogen peroxide (H2O2) evolution and in situ tetracycline (TC) mineralization performances of the prepared samples were studied. The optimal sample could produce 9127 μmol g–1h–1H2O2 from 10 vol% ethanol solution and air atmosphere, which was 10.9 times higher than that of pristine CN. With addition of 4 mg L–1 Fe2+ ions, 97.2 % of TC (10 mg L–1) and 98.7 % of total organic carbon were removed in 30 min under the actions of holes, hydroxyl and superoxide radicals. The high H2O2 yield and TC mineralization ratio were attributed to the increased light absorption, efficient electrons-holes separation, enhanced surface O2 adsorption (0.3878 mmol g−1), and accelerated conversion from Fe3+ to Fe2+ ions. Meanwhile, the system possessed good reusability in H2O2 evolution and TC removal. It is expected that this work can provide new ideas to design CN-based photo-Fenton system to treat wastewater.