Dependence of mechanical properties on molecular motion in polymers

Abstract Considerable progress has been made in the past 20 years in the synthesis, characterization and fabrication of plastics. Previous SPE Award winners, such as Mark, Natta, and Marvel dealt largely with synthesis; Flory with characterization; Alfrey and Du Bois with fabrication. One of the still unsolved problems lies in the realm of relating mechanical properties, such as impact strenght and creep to molecular structure. The design enginner who wishes to use a plastic part is concerned primarily with how some property such as impact strenght varies with temperature, speed of test, test method, etc. The polymer scientist must know why. Through knowing why, he may be able to design better plastics. This paper attempts to survey some of the world‐wide progress made in this area in the past 10 years. The ultimate goal is to understand these mechanical properties in terms of internal molecular motions which occur in solid polymers. Internal motion can be detected by electrical, electromagnetic and dynamic mechanical measurements. When these three methods are applied on a given polymer over a range of temperatures, insights can be gained as to the variation of impact strength and other properties with temperature and frequency for that same polymer. These three fundamental methods, which require very small samples (less than 50 grams), can provide insight into the practical behavior of plastic materials over the wide range of temperatures and frequencies encountered in the real world.