On the design of shell-and-tube heat exchangers under uncertain operating conditions

热交换器 管壳式换热器 管(容器) 壳体(结构) 机械工程 迷惑 材料科学 机械 工程类 核工程 物理
作者
Antonio C. Caputo,Alessandro Federici,Pacifico M. Pelagagge,P. Salini
出处
期刊:Applied Thermal Engineering [Elsevier BV]
卷期号:212: 118541-118541 被引量:8
标识
DOI:10.1016/j.applthermaleng.2022.118541
摘要

This paper addresses the problem of designing shell and tube heat exchangers operating under uncertain conditions. Traditional design methods assume constant process conditions and known value of thermal design factors. Thus may fail to meet specifications when operational conditions change. Use of safety factors or worst-case design often leads to conservative design and equipment oversizing. No guideline is available in the literature for choosing a design approach. In order to provide designers better awareness on this issue, we investigate when uncertainty should be taken into account, what are the advantages and drawbacks of available approaches for design under uncertainty, and which is the preferred method to be applied in specific problem instances. To answer the above research questions, comparative sizing of equipment is carried out under consistent assumptions adopting five alternative design methods; namely design for nominal reference condition with verification of off-design performances, worst case design, use of safety margins, design to optimize a prescribed objective function, and robust design. Either random uncertainty in external process conditions, and epistemic uncertainty in heat transfer coefficients and fouling resistances are considered. Different types of specifications (more/less is better or nominal is better) are accounted for. Probability of meeting specifications and resulting geometrical characteristics are compared. It is the first time that a similar comparison is carried out, and results discussion allows to identify merits and limitations of the considered approaches. It is found that no single approach is superior, as any method can be suited to a design situation but perform poorly in other cases. Justification for explaining the observed behaviour is used in order to provide guidance to designers in choosing the preferable design method for a specific instance resulting in more cost-effective equipment configuration with higher probability of meeting specifications.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
更新
PDF的下载单位、IP信息已删除 (2025-6-4)

科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
mirrovo完成签到 ,获得积分10
刚刚
落后千雁完成签到,获得积分10
2秒前
Ava应助dongdong采纳,获得10
2秒前
小巧的问旋完成签到,获得积分10
3秒前
zbx发布了新的文献求助10
3秒前
3秒前
夏下下完成签到 ,获得积分10
4秒前
怡然的代玉完成签到,获得积分10
4秒前
Tristan完成签到 ,获得积分10
4秒前
4秒前
薛wen晶完成签到 ,获得积分10
4秒前
夜宵应助阿辉采纳,获得10
5秒前
香菜完成签到,获得积分10
5秒前
5秒前
Sandro完成签到,获得积分10
5秒前
smottom应助典雅的土豆采纳,获得10
6秒前
渴望者完成签到,获得积分10
6秒前
N_wh完成签到,获得积分10
7秒前
粽子完成签到,获得积分10
8秒前
执着夏岚完成签到 ,获得积分10
8秒前
hhyy发布了新的文献求助10
9秒前
蛋挞好好吃完成签到,获得积分10
9秒前
linjunqi发布了新的文献求助10
9秒前
9秒前
阿六完成签到,获得积分10
10秒前
doudou完成签到,获得积分10
10秒前
tang给张123的求助进行了留言
10秒前
务实映之完成签到,获得积分10
10秒前
为Zn发电完成签到,获得积分10
11秒前
星辰大海应助感动傀斗采纳,获得10
11秒前
11秒前
姚盈盈发布了新的文献求助10
11秒前
11秒前
SYLH应助粽子采纳,获得20
12秒前
洪星发布了新的文献求助10
13秒前
ljw完成签到,获得积分10
13秒前
13秒前
mariawang发布了新的文献求助10
14秒前
寒冷的老黑完成签到,获得积分10
14秒前
陈丽媛发布了新的文献求助10
14秒前
高分求助中
【提示信息,请勿应助】关于scihub 10000
The Mother of All Tableaux: Order, Equivalence, and Geometry in the Large-scale Structure of Optimality Theory 3000
Social Research Methods (4th Edition) by Maggie Walter (2019) 2390
A new approach to the extrapolation of accelerated life test data 1000
北师大毕业论文 基于可调谐半导体激光吸收光谱技术泄漏气体检测系统的研究 390
Phylogenetic study of the order Polydesmida (Myriapoda: Diplopoda) 370
Robot-supported joining of reinforcement textiles with one-sided sewing heads 360
热门求助领域 (近24小时)
化学 材料科学 医学 生物 工程类 有机化学 生物化学 物理 内科学 纳米技术 计算机科学 化学工程 复合材料 遗传学 基因 物理化学 催化作用 冶金 细胞生物学 免疫学
热门帖子
关注 科研通微信公众号,转发送积分 4009325
求助须知:如何正确求助?哪些是违规求助? 3549162
关于积分的说明 11301105
捐赠科研通 3283572
什么是DOI,文献DOI怎么找? 1810370
邀请新用户注册赠送积分活动 886205
科研通“疑难数据库(出版商)”最低求助积分说明 811301