Enhanced low-temperature activity of Mn-based catalysts for NH3 selective catalytic reduction of NO through Ce-modulated redox and TiO2 shell construction

Manganese-based catalysts presented great challenges for the wide operating window in the selective catalytic reduction of NOx with NH3 (NH3-SCR). Aiming at enhancement of the SCR performance, a series of MnCeOx (MnyCe1) and MnxCe1@TiO2 catalysts were prepared. Impressively, the Mn1Ce1 catalyst exhibited excellent low-temperature activity, achieving over 80 % conversion of NO within the temperature range of 85–350 °C, but the N2 selectivity decreased with the increasing temperature. Upon coating a TiO2 shell, the temperature window with N2 selectivity exceeding 80 % was significantly widened to 85–350 °C since the weak redox ability limited the NH3 oxidation to undesired N2O. High surface area, together with abundant acid sites and chemical adsorbed oxygen that formed via the interaction between Mn4+/Mn3+, Ce4+/Ce3+ and Ti4+/Ti3+, contributed to the superior catalytic performance of MnxCe1@TiO2. In addition, through in situ DRIFTS analysis, both Eley-Rideal and Langmuir-Hinshelwood reaction routes were observed. This work would provide an efficient and low-cost strategy for preparing Mn-based catalysts with excellent low-temperature activity for NOx removal.