Tailoring the Broadband Emission in All‐Inorganic Lead‐Free 0D In‐Based Halides through Sb3+ Doping

Adv. Opt. Mater. 2021, 9, 2100434 DOI: 10.1002/adom.202100434 The authors regret that errors concerning the full-width at half maximum (FWHM) appear in their article https://doi.org/10.1002/adom.202100434, which could affect the interpretation of their results but do not influence the conclusions. The corrected sections are presented here. At the bottom of page 2, in the right-hand column, the value of FWHM (≈195 meV) is incorrect. The correct one is 492 meV. In Figure 2c, the plot of the FWHM of Sb3+ as a function of temperature has to be replaced. The correct figure is presented below. At the bottom of page 3, in the left-hand column, the values of FWHM (“a PL line broadening from 160 to 194 meV”) are incorrect. The correct ones are 411 to 502 meV. At the bottom of page 3, in the right-hand column, the fitted phonon energy and the Huang-Rhys factor are incorrect. The complete and correct sentence is as follows: The phonon energy (ℏωphonon) and the Huang-Rhys factor (S) were calculated to be 20.6 meV and 46.4, respectively. At the bottom of page 3, in the right-hand column, the value of FWHM (“the broadband (195 meV)”) is incorrect. The correct one is 492 meV. In Table S2, the FWHMs for the emissions of Cs2InBr5·H2O:x%Sb3+ have to be replaced. The correct table is presented below. In Table S3, the FWHMs for the emissions of Sb3+-doped A2InX5·H2O and A3InX6 (A = Cs, Rb; X = Cl, Br) have to be replaced. The correct table is presented below.