Development and Validation of a Dynamic Flowsheet Model for a 350 MWe Supercritical Circulating Fluidized Bed Boiler

The circulating fluidized bed (CFB) boiler is highly recommended in peak shaving for its wide load regulating range compared with the pulverized coal (PC) boiler. However, the research on dynamic flowsheet model of the CFB boiler is quite limited due to its complex flow regime. In this paper, both steady state and d ynamic flowsheet model of a supercritical 350 MWe CFB boiler was developed based on Aspen Plus and Aspen Dynamics software coupled with comprehensively user defined combustion kinetics and heat transfer coefficient with FORTRAN subroutines. This model was then validated by the operating data of the 350 MWe supercritical CFB boiler. Based on this model, the dynamic characteristics of three typical step signal disturbances, coal flow rate, primary flow rate and secondary air flow rate, were further analyzed to provide theoretical references to dynamic operation. Also, the quantitative relation between the stabilization time and step signal amplitude was calculated. Above all, this dynamic flowsheet model can not only be used to conduct dynamic behavior prediction and analysis but also provide transfer functions to the further development of CFB automatic control system.