Preparation of Consolidated Dust Suppression Materials Based on Pectin: Graft Modification Experiment and Reaction Mechanism

The natural material pectin was used as the matrix to prepare a dust suppressant. The regression model in response to the grafting ratio was established, and the optimum modification scheme was determined. The amount of monomer, initiator, cross-linking agent, and reaction temperature was 3.20 g, 0.20 g, and 0.15 g and 92 °C, respectively. Through Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy tests, not only the formation of the product in graft copolymerization reaction was validated but also the wettability of pectin was significantly improved. The surface morphology of pectin before and after modification was observed by a scanning electron microscope. After graft copolymerization treatment, the surface of pectin presented a dense grid structure, which proved that the pectin-modified dust suppressant can play a crucial role in wetting and condensing coal dust. Contact angle tests were used to characterize the effect of pectin modification on the wettability of bituminous coal before and after modification. The results of contact angle tests showed that when the droplets just contacted the bituminous coal flakes, the contact angle of modified pectin droplets on the flakes was the smallest, and the value was 55.21°. Compared with pure water droplets and unmodified pectin droplets, it decreased by 21.66° and 18.50°. The modification reaction process and dust suppression mechanism were explained at the molecular level.