Liquid PEG Polymers Containing Antioxidants: A Versatile Platform for Studying Oxygen-Sensitive Photochemical Processes

This article proposes the exploitation of widely available, inexpensive, innocuous "green" liquid polyethylene glycol (PEG) polymers containing the oxygen scavenger oleic acid (OA) as promising media for studying oxygen-sensitive photochemical processes. Here we report the successful application of this media to detailed investigations of triplet-sensitized photochemical upconversion, previously established as being readily poisoned by dissolved oxygen. Three different PEG materials were investigated with increasing molecular weight from 200 to 600 g/mol, coded as PEG-200, PEG-400, and PEG-600. These fluidic polymers facilitate an oxygen-depleted environment in comparison to commonly employed organic solvents while providing high solubility and diffusion for the dissolved chromophores. Moreover, the low oxygen permeation afforded by these PEG solvents allows them to remain deoxygenated in open containers under ambient conditions for extended time periods. OA, 9,10-dimethylanthracene (DMA), and 2,5-dimethylfuran (DMF) are shown to efficiently and quantitatively consume dissolved oxygen in the PEG environment in the presence of the photoactivated triplet sensitizer platinum(II) tetraphenyltetrabenzoporphyrin (PtTPBP). Oxygen consumption was directly correlated with systematically increasing sensitizer excited-state lifetimes that eventually reach the same plateau as achieved through extensive N2 sparging. Diffusion-controlled bimolecular triplet-triplet energy transfer quenching between PtTPBP and the acceptor/annihilator 9,10-bisphenylethynylanthracene (BPEA) was observed in all three PEG formulations investigated. Subsequent triplet-triplet annihilation, between triplet excited BPEA acceptors, achieves bright and stable upconverted singlet fluorescence from BPEA with no decrease in intensity over 20 h under ambient conditions. In the champion composition (PEG 200), the upconversion quantum efficiency reached 31% under conditions where triplet-triplet annihilation was maximized. This is in stark contrast for the same upconverting pair measured in toluene under ambient conditions, which rapidly decomposes upon exposure to visible light. To illustrate that these PEG compositions could be translated into a suitable solid-state format, these viscous solutions were embedded in a transparent polyurethane polymer shell yielding a flexible and long-term stable upconverting cell that can be manipulated for possible real-world applications. Although the current investigation focused on photochemical upconversion, the oxygen-depleted environments developed here can be utilized to study a plethora of oxygen-intolerant photochemical reactions.