Ultralight Flexible Collagen Fiber Based Aerogels Derived from Leather Solid Waste for High Electromagnetic Interference Shielding

Designing and developing high-performance shielding materials against electromagnetic interference is of utmost importance due to the rapid advancement of wireless telecommunication technologies. Such materials hold both fundamental and technological significance. A three-stage process is presented for creating ultralight, flexible aerogels from biomass to shield against electromagnetic interference. Collagen fibers sourced from leather solid waste are used for: (i) freeze-drying preparation of collagen fibers/poly(vinyl alcohol) (PVA) aerogels, (ii) adsorption of silver nanowires (AgNWs) onto collagen fiber/PVA aerogels, and (iii) Hydrophobic modification of collagen fiber/PVA/AgNWs aerogels with 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (POTS). Scanning electron microscopy studies reveal that an interweaving of AgNWs and collagen fiber/PVA porous network has formed a conductive network, exhibiting an electrical conductivity of 103 S·m–1. The electromagnetic interference shielding effectiveness reached more than 62 dB, while the density was merely 5.8 mg/cm3. The collagen fiber/PVA/AgNWs/POTS aerogel displayed an even better electromagnetic shielding efficiency of 73 dB and water contact angle of 147°. The study results emphasize the distinctive capacity of leather solid waste to generate cost-effective, ecofriendly, and highly efficient electromagnetic interference shielding materials.