Single layer vanadium oxide assisted switchable metasurfaces for transmissive and reflective polarization conversion

Abstract Polarization control using metasurfaces is highly advantageous; however, most metasurfaces operate exclusively in either transmission or reflection mode. Additionally, achieving both wide bandwidth and high efficiency simultaneously in their design remains a significant challenge. Here, we design a high-efficiency and wideband switchable metasurface that can switch between transmissive and reflective polarization conversion modes by utilizing a single layer of I-shaped resonators and gold-vanadium dioxide (VO2) alternating gratings printed on a quartz substrate. When VO2 transitions to its metallic phase, the continuous metal layers of gold-VO2 eliminate transmission and the designed metasurface operates as a reflective cross-polarization converter with a polarization conversion ratio (PCR) exceeding 0.9 over a broad frequency range of 1.4-3.3 THz. Conversely, when VO2 is in its insulator phase, the THz incoming wave can transmit through the gratings, and the design behaves as a transmissive cross-polarization converter with a PCR above 0.99 in the 0.75-4.0 THz range for a forward y- polarized wave. The working mechanism for both transmissive and reflective polarization conversion modes is explained through theoretical analysis and surface current distributions. With the advantages of facile design, high performance, and dual functionality, our design is expected to be applied in the fields of imaging, sensing, and communication.