Control of particle size in dispersion polymerization of methyl methacrylate

Abstract Poly(methyl methacrylate) (PMMA) particles ranging in diameter from 2 to 10 μm were prepared by dispersion polymerization. The effects of various polymerization parameters on the size and monodispersity were systematically investigated. The particle size was found to increase with increasing polymerization temperature, concentration and decomposition rate of the initiator, and solvency of the dispersion medium. It also increased with increasing concentration and molecular weight of the polymeric stabilizer, poly(vinyl pyrrolidone) (PVP). As the monomer concentration was increased from 5 to 20 wt %, a minimum was found in the particle size at a monomer concentration of 10 wt %. A costabilizer was found to be necessary for preparing monodisperse particles at stabilizer concentrations below 2 wt %. A recycling experiment showed that the consumption of PVP was quite small in each cycle and the residual materials in this system could be reused readily. © 1993 John Wiley & Sons, Inc.