Design of a high precision converter for multi-sensor information fusion

The converter is a measuring device and is used together with the displacement sensor. In view of the existing sensor transform device is susceptible to error and temperature drift effects acquisition accuracy is not high, we design a high precision transducer, multi-sensor information fusion for vehicle steering gear shaft angular displacement signal measurement, signal transformation and digital transmission. The converter has the characteristics of high precision, miniaturization and low cost. Multi-sensor information fusion high-precision converter adopts front-end signal amplifier circuit, following filter processing circuit and embedded software of microprocessor for online compensation to satisfy the requirements of high-precision transformation. The microcontroller is used as the main control chip to meet the requirements of 8-channel bipolar analog signal acquisition. Two 14-bit, 6-channel A/D chips are used to convert the bipolar analog signal in the range of ±10V, and the RS422 hardware interface circuit performs digital transmission according to the time sequence specified by the central programmer. The experimental results show that the conversion accuracy of the device can reach 0.06%, the digital signal transmission is stable, and it can be widely used in industrial production.