High cell density cultivation of Corynebacterium glutamicum by deep learning-assisted medium design and the subsequent feeding strategy

To improve the cell productivity of Corynebacterium glutamicum, its initial specific growth rate was improved by medium improvement using deep neural network (DNN)-assisted design with Bayesian optimization (BO) and a genetic algorithm (GA). To obtain training data for the DNN, experimental design with an orthogonal array was set up using a chemically defined basal medium (GC XII). Based on the cultivation results for the training data, specific growth rates were observed between 0.04 and 0.3/h. The resulting DNN model estimated the test data with high accuracy (R2test ≥ 0.98). According to the validation cultivation, specific growth rates in the optimal media components estimated by DNN-BO and DNN-GA increased from 0.242 to 0.355/h. Using the optimal media (UCB_3), the specific growth rate, along with other parameters, was evaluated in batch culture. The specific growth rate reached 0.371/h from 3 to 12 h, and the dry cell weight was 28.0 g/L at 22.5 h. From the cultivation, the cell yields against glucose, ammonium ion, phosphate ion, sulfate ion, potassium ion, and magnesium ion were calculated. The cell yield calculation was used to estimate the required amounts of each component, and magnesium was found to limit the cell growth. However, in the follow-up fed-batch cultivation, glucose and magnesium addition was required to achieve the high initial specific growth rate, while appropriate feeding of glucose and magnesium during cultivation resulted in maintaining the high specific growth rate, and obtaining a cell yield of 80 g/Lini.