材料科学
钒
抗弯强度
复合材料
石墨烯
流动电池
电阻率和电导率
微观结构
碳纤维
电导率
复合数
电池(电)
冶金
纳米技术
电气工程
化学
工程类
物理化学
功率(物理)
物理
量子力学
作者
Weineng Liao,Yue Zhang,Xinjie Zhou,Mingdan Zhuang,Dingyu Guo,Fengjing Jiang,Qingchun Yu
标识
DOI:10.1002/slct.201900521
摘要
Abstract Bipolar plates possessing both high electrical conductivity and mechanical strength has been urgently required for redox flow batteries and fuel cells. Contrary to the conventional method of increasing carbon content to maximize the bipolar plate's electrical conductivity, a novel low‐carbon‐content design based on the bridging effect of graphene is developed. The microstructure, electrical conductivity, flexural strength, vanadium permeability, corrosion current density and its performance in vanadium redox flow battery single cell have been investigated. The low‐carbon‐content bipolar plates present both high electrical conductivity and flexural strength. Low area specific resistance of 3.3 mΩ cm 2 is reached at 18.7 wt.% carbon content, and flexural strength of 48.1 MPa can be obtained after being reinforced by carbon fibers. The voltage efficiency and energy efficiency of the single cell reach as high as 88.6% and 85.7%, respectively, at 100 mA cm −2 .
科研通智能强力驱动
Strongly Powered by AbleSci AI