Investigation of the moisture transfer ability and thermal comfort properties of single-layer cotton/polyester interwoven fabrics

In this paper, hydrophilic cotton (CO) yarn and hydrophobic cross-section polyester (PET) filaments were used to prepare single-layer interwoven fabrics (CO/PET fabrics) with plain, 3/1 twill, and 8/5 satin to formulate a hydrophobicity–hydrophilicity gradient across the fabric for obtaining a good water transfer ability. The CO fabrics and PET fabrics were prepared for comparison. The contact angle and thermo-physiology properties of the fabrics, including the wicking property, moisture management ability, drying property, air permeability and water vapor permeability, thermal property, and dynamic cooling property, were investigated. The results show that the asymmetric hydrophobicity–hydrophilicity characteristic can be formed across CO/PET fabric with 3/1 twill and 8/5 satin. This can improve the water transfer ability from the inside to the outside of the fabrics, and the longer the floating length of the fabric is, the stronger the water transfer ability is. These two fabrics also exhibit excellent wicking properties, overall moisture management capability, and thermal comfort, and have good permeability, drying properties, and dynamic cooling properties compared to the corresponding fabrics. As a result, these two CO/PET interwoven textiles are more suitable for application as clothes worn in summer. The interweaving technique combining hydrophilic and hydrophobic yarns is an easy and cost-effective method to prepare fabrics that meet summer requirements. This work provides insight into the thermal and moisture comfort property of interwoven fabrics for summer garments.