Reactive Vapor-Phase Inhibitors for Area-Selective Depositions at Tunable Critical Dimensions

Area-selective depositions (ASD) take advantage of the chemical contrast between material surfaces in device fabrication, where a film can be selectively grown by chemical vapor deposition on metal versus a dielectric, for instance, and can provide a path to nontraditional device architectures as well as the potential to improve existing device fabrication schemes. While ASD can be accessed through a variety of methods, the incorporation of reactive moieties in inhibitors presents several advantages, such as increasing thermal stability and limiting precursor diffusion into the blocking layer. Alkyne-terminated small molecule inhibitors (SMIs)─propargyl, dipropargyl, and tripropargylamine─were evaluated as metal-selective inhibitors. Modeling these SMIs provided insight into the binding mechanism, influence of sterics, and complex polymer network formed from the reaction between inhibitors consisting of alkene, aromatic, and network branchpoints. While a significant contrast in the binding of the SMIs on copper versus a dielectric was observed, residual amounts were detected on the dielectric surfaces, leading to variable ALD growth rates dependent on pattern-critical dimensions. This behavior can be controlled and utilized to direct film growth on patterns only above a critical threshold dimension; below this threshold, both the dielectric and metal features are protected. This method provides another design parameter for ASD processes and may extend its application to broader-ranging device fabrication schemes.