Strength Increase of Alumina Foams by a Sodium Aluminosilicate Glass Coating with Subsequent Na+ ↔ K+ Ion Exchange (Gorilla Glass Coating)

Reticulated alumina ceramic foams manufactured by the Schwartzwalder technique are coated with a sodium aluminosilicate glass using an aqueous precursor containing alumina particles and sodium silicate. After a heat treatment, a well‐adhering glass layer with a thickness between 10 and 120 μm is obtained. Besides the strut surface, the glass phase also penetrates the hollow strut cavities as well as strut cracks. The total porosity of the glass‐coated foams is between 88% and 90%, and the open cellular structure is not negatively affected by the glass coating. The compressive strength increases by a factor of two under consideration of the decrease in total porosity; a compressive strength in the order of magnitude of 2 MPa is feasible. An ion exchange of Na + by K + into the glass coating layer (chemical strengthening) is successfully demonstrated, but does not result in an additional improvement of the compressive strength.