Unlocking the Potential of MXene in Catalysis: Decorated Mo2CTx Catalyst for Ammonia Synthesis under Mild Conditions

Ammonia, which is one of the most important chemicals for the synthesis of dyes, pharmaceuticals, and fertilizers, is produced by the reaction of molecular hydrogen with nitrogen, over an iron-based catalyst at 400-500 °C under pressure of over 100 bar. Decreasing the operating temperature and pressure of this highly energy-intensive process, developed by Haber and Bosch over 100 years ago, would decrease energy consumption in the world. In this work, we used two-dimensional Mo₂CT_x MXene as a support for a cobalt-based catalyst. The MXene functionalized by Co showed catalytic activity for ammonia synthesis from H₂ and N₂ at temperatures as low as 250 °C, without any pretreatment. The developed catalyst was highly active for ammonia synthesis, demonstrating a high rate of up to 9500 μmol g^-1_{active phase} h^-1 at 400 °C under ambient pressure in steady-state conditions, and did not suffer from any deactivation after 15 days of reaction. The apparent activation energy (E_a) was found to be in the range of 68-74 kJ mol^-1, which is in line with values reported for highly active catalysts. This improved catalyst may decrease the energy consumption in the synthesis of ammonia and its derivatives, as well as facilitate the use of ammonia as a hydrogen carrier for renewable energy storage.