Development and characterization of emulsion gels prepared via gliadin-based colloidal particles and gellan gum with tunable rheological properties for 3D printed dysphagia diet

Dysphagia, a condition characterized by difficulty swallowing, has emerged as a threat to health. Herein, we investigated the feasibility of preparing a novel 3D-printed dysphagia diet using emulsions and gellan gum. A gel network was facilitated by the inclusion of gellan gum, which also helped to reduce the size of the oil droplets. Emulsion gels (with 0.3 %-0.5 % gellan gum) were stable at 25 °C for 30 days and tolerated a high ionic concentration of 800 mmol L-1. Emulsion gels remained stable after heat treatment and centrifugation. The excellent stability of the emulsion gels was related to the three-dimensional network developed by the gellan gum. The rheological results validated the solid-state behavior, shear thinning behavior and structural recovery of emulsion gels. Emulsion gels with 0.3 %-0.5 % gellan gum were suitable for 3D printing since they had high printing accuracy, self-support, and smooth surface texture. International Diet Standardization Initiative (IDDIS) tests have shown that emulsion gels can be classified as a level 3-5 dysphagia diet. In addition, the bioaccessibility of astaxanthin increased 1.7 times after being encapsulated by emulsion gels. Overall, these results demonstrate the potential of emulsion gels in the development of novel 3D-printed diets for dysphagia and bioactive protection.