Performance improvement of InGaN LEDs by using strain compensated last quantum barrier and electron blocking layer

Abstract The influence of u-AlGaN/InGaN superlattices (SLs) last quantum barrier (LQB) and p-AlGaN/InGaN SLs electron blocking layer (EBL) on the performance of InGaN light-emitting diodes (LEDs) are analyzed experimentally and theoretically. Research results indicated that LED C with u-AlGaN/InGaN SLs LQB and p-AlGaN/InGaN SLs EBL exhibit the highest output power among the three groups of LED samples. At 200 mA, the output power of LED C is enhanced by 27.5% as compared with that of reference LED A with u-GaN LQB and p-AlGaN/GaN SLs EBL. The efficiency droop of LED C has also been suppressed effectively. At 200 mA, the efficiency droop of LED C was 28.5%, which was smaller than that of LED A 34%. By analyzing the distribution of electron/hole concentration in multiple quantum wells, it is indicated that the leakage of electrons from the active layer can be effectively reduced and the injection efficiency of holes into the active layer can be dramatically enhanced by using strain compensated AlGaN/InGaN SLs LQB and EBL. The reason is that the potential energy barriers for electrons and holes could be effectively regulated by using the strain compensated LQB and EBL, which is consistent with simulation results of energy band diagram.