Ultrasensitive fiber sensor with enhanced Vernier effect for simultaneous measurements of transverse load and temperature

Based on enhanced Vernier effect, a compact fiber sensor with ultrahigh sensitivity is proposed for simultaneous transverse load (TL) and temperature measurements. A single mode fiber (SMF) is spliced with a segment of hollow-core fiber (HCF) coated with polydimethylsiloxane (PDMS), some PDMS is injected into the HCF, forming a Vernier sensor with an air cavity adjacent to a PDMS cavity. It is shown that TL and temperature changes give rise to opposite and remarkable different variations in lengths of the two cavities, thereby enhancing Vernier effect and in favor of simultaneous measurements of TL and temperature. Moreover, the limited sensitivity magnification due to the length mismatch between the two cavities is compensated for by reconstructing the Vernier envelope with a broadened free spectrum range (FSR) from output signal. As a result, the highest TL sensitivity reported so far of −2637.47 nm/N and a good condition number of 69.056 for the sensitivity coefficient matrix have been achieved.