控制理论(社会学)
定子
模型预测控制
电压
计算机科学
病媒控制
电流(流体)
扭矩
同步电动机
控制器(灌溉)
控制工程
控制(管理)
工程类
感应电动机
物理
人工智能
生物
热力学
电气工程
机械工程
农学
作者
Yongchang Zhang,Wenjia Shen,Haitao Yang
标识
DOI:10.23919/cjee.2023.000020
摘要
Deadbeat predictive current control (DPCC) has been widely applied in permanent magnet synchronous motor (PMSM) drives due to its fast dynamic response and good steady-state performance.However, the control accuracy of DPCC is dependent on the machine parameters' accuracy.In practical applications, the machine parameters may vary with working conditions due to temperature, saturation, skin effect, and so on.As a result, the performance of DPCC may degrade when there are parameter mismatches between the actual value and the one used in the controller.To solve the problem of parameter dependence for DPCC, this study proposes an improved model-free predictive current control method for PMSM drives.The accurate model of the PMSM is replaced by a first-order ultra-local model.This model is dynamically updated by online estimation of the gain of the input voltage and the other parts describing the system dynamics.After obtaining this ultra-local model from the information on the measured stator currents and applied stator voltages in past control periods, the reference voltage value can be calculated based on the principle of DPCC, which is subsequently synthesized by space vector modulation (SVM).This method is compared with conventional DPCC and field-oriented control (FOC), and its superiority is verified by the presented experimental results.
科研通智能强力驱动
Strongly Powered by AbleSci AI