Evaluation of Ag@TiO2/WO3 heterojunction photocatalyst for enhanced photocatalytic activity towards methylene blue degradation

Methylene blue is a dye that is extensively used in the textile industry but it is a hazardous, carcinogenic, and mutagenic pollutant. Therefore, the treatment of wastewater containing methylene blue by photocatalytic degradation under visible light without using any sacrificial agent (H2O2) is an important method towards attaining an eco-friendly environment. Herein, the nanocomposite of Ag-doped TiO2 on WO3 nanoparticles ([email protected]2/WO3) was prepared by a modified sol-gel precipitation route, and their physicochemical properties were studied. The bandgap of Ag sensitized metal oxide nanocomposite in [email protected]2/WO3 was slightly reduced compared to the pristine titania due to the creation of interstitial energy states during colligation of titania and tungsten oxide. The ease of charge carrier transfers through the heterojunction of TiO2/WO3 increased the photocatalytic activity of the photocatalyst. Furthermore, in [email protected]2/WO3 the plasmonic Ag sensitization to the host semiconductor TiO2 has further boosted the rate of photocatalytic degradation because of the surface plasmon resonance (SPR) and hindrance of charge carrier recombination. Due to the synergistic effect of SPR and the presence of heterojunction in [email protected]2/WO3, the photocatalytic activity was found to be 25 times higher for [email protected]2/WO3 than that of commercial DP25 photocatalyst under visible light towards methylene blue degradation.