Review: Mitigation measures to reduce tire and road wear particles

The generation of tire wear is an inevitable outcome of the friction between the road and the tire which is necessary for the safe operation of vehicles on roadways. Tire wear particles form agglomerates with road surface material. These agglomerates are called tire and road wear particles (TRWP). Due to their persistence in the environmental compartments and their potentially harmful effects, research on preventative and end-of-pipe mitigation strategies for TRWP is essential. The major goal of this study is to summarize and assess the state of the art in science and technology of mitigation measures for TRWP as the basis for further research activities. Approximately 500 literature sources were found and analyzed in terms of the efficiency, maturity, implementation, and impact of the mitigation measures. Generally, technological and management mitigation measures to reduce the generation of TRWP are beneficial since they prevent TRWP from entering the environment. Once released into environmental compartments, their mobility and dispersion would increase, making removing the particles more challenging. Technological and management mitigation measures after the release of TRWP into the environment are mainly well established in industrialized countries. Street cleaning and wastewater technologies show good removal efficiencies for TRWP and microplastics. In any case, no individual measure can solely solve the TRWP issue, but a set of combined measures could potentially be more effective. The absence of fully-developed and standardized methods for tire abrasion testing and measuring TRWP in the environment makes it impossible to reliably compare the tire abrasion behavior of different tire types, determine thresholds, and control mitigation actions. Field tests and pilot studies are highly needed to demonstrate the effectiveness of the abatement measures under real conditions.