Hot deformation behavior and microstructure evolution model of 7055 aluminum alloy

Hot compression tests were conducted on 7055 aluminum alloy under different strain rates, temperatures, and reduction ratios. The influence of deformation parameters on microstructure evolution and hot deformation behavior was studied through EBSD and TEM characterization. An Arrhenius constitutive model was established and the recovery and recrystallization characteristics of the alloy under different conditions were analyzed. Results showed that the softening mechanism during the hot compression process of 7055 aluminum alloy was mainly attributed to recovery and partial recrystallization. The Zener-Holloman (Z) parameter was utilized to reveal the combined effects of strain rate and temperature on recrystallization behavior. Under conditions of high LnZ values (20 < LnZ), the alloy exhibited predominantly discontinuous dynamic recrystallization (DDRX) characteristics, while at low LnZ values (14 < LnZ < 17), it displayed significant continuous dynamic recrystallization (CDRX) characteristics. The alloy showed a coexistence of CDRX and DDRX phenomena under conditions of moderate LnZ values (17