Wearable Bracelet Monitoring the Solar Ultraviolet Radiation for Skin Health Based on Hybrid IPN Hydrogels

The risk of extensive exposure of the human epidermis to solar ultraviolet radiation is significantly increased nowadays. It not only induces skin aging and solar erythema but also increases the possibility of skin cancer. Therefore, a simply prepared, highly sensitive, and optically readable device for monitoring the solar ultraviolet radiation is highly desired for the skin health management. Because of the photoinitiated polymerization triggered by graphene-carbon nitride (g-C3N4) under ultraviolet radiation, g-C3N4 is homogeneously distributed in the hybrid hydrogels containing N-isopropylacrymide (NIPAM), poly(ethylene glycol) methyl ether methacrylate (OEGMA300), and sodium alginate (SA). By further immersing the hybrid hydrogels into calcium chloride solution, hybrid alginate-Ca2+/P(NIPAM-co-OEGMA300)/g-C3N4 interpenetrating polymeric network (IPN) hydrogels are obtained. Due to the homogeneous distribution of g-C3N4 and the existence of thermoresponsive polymers, the hybrid IPN hydrogels present good adsorption capability and high degradation efficiency for methylene blue (MB) especially at high temperature under ultraviolet radiation. Based on this unique property, the bracelet monitoring skin health is prepared by simply immersing the hybrid IPN hydrogels into the MB solution and then wrapping it with PET foil. Because the immersion time for the top, middle, and bottom parts of the hybrid IPN hydrogels is gradually increased, their colors vary from light to dark blue. A longer time is required for the discoloration of the darker part under solar ultraviolet radiation. Thus, the bracelet can be used to conveniently monitor the dose of solar ultraviolet radiation by simply checking the discoloration in the bracelet under sunshine. Due to the facile preparation and low cost of the bracelet, it is a promising candidate for wearable devices for skin health management.